Documentation Index

Fetch the complete documentation index at: https://support.perimeter81.com/llms.txt

Use this file to discover all available pages before exploring further.

Important Notice: This Perimeter 81 documentation site is being deprecated and will be permanently removed on July 26, 2026.

Please use the latest Check Point Documentation Portal for current product documentation and updates. Access the Check Point Documentation Portal

Removing the Wireguard Connector

  • Published on Aug 20, 2023
  • 1 minute(s) read
  • Perimeter Support
 Prev Next

Removing the Wireguard Connector


  1. Run the following commands:
    Ubuntu
# Locate the WireGuard packages # (the output of this command will show you all wireguard packages installed on the machine)
dpkg -l | grep wireguard

# Delete all packages found that are associated with WireGuard
# (Run this command for each package found, replace  with the output from the previous command)
apt-get remove --purge # Locate the WireGuard packages # (the output of this command will show you all wireguard packages installed on the machine)
dpkg -l | grep wireguard


# Locate the WireGuard packages # (the output of this command will show you all wireguard packages installed on the machine)
yum list installed | grep wireguard

# Delete all packages found that are associated with WireGuard# (Run this command for each package found, replace  with the output from the previous command)
yum remove # Locate the WireGuard packages # (the output of this command will show you all wireguard packages installed on the machine)
yum list installed | grep wireguard